| Manufacturer | Model | Year | Machine ID | Type Machine | Control | Condition | U / P | ShortSpecs | Photos |
| Amera-Seiki | VT-1600 ATC | 2011 | 11055 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 18iTB | New | Yes | | Yes |
| Amera-Seiki | VT-2000 MC | 2011 | 10635 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 18iTB | New | No | | Yes |
| Amera-Seiki | VT-600 MC | 2008 | 10773 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc OiTC | Excellent | Yes | | Yes |
| Berthiez | BM-180 | 1974 | 10926 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes |
| Bertram | 100" | | 10902 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes |
| Bertram | 60" | 1956 | 7569 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes |
| Bullard | 36" Cutmaster | 1943 | 10914 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes |
| Bullard | 36" Cutmaster | 1951 | 10661 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes |
| Bullard | 36" Cutmaster | 1958 | 8124 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes |
| Bullard | 36" Cutmaster | 1954 | 10915 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes |
| Bullard | 36" Dynatrol | 1968/1994 | 9939 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc 16TT | Good | Yes | 36" 4-Jaw Manual Chuck, 39" Maximum Swing Side Head Up, 46" Maximum Swing Side Head Down, 30" Under Rail, 468 RPM, Turret Head, Side Head, Pendant Control, Power Indexing Turret Head, Power Indexing Turret Side Head, Variable Rapid Traverse | Yes |
| Bullard | 36" Dynatrol | 1967 | 6549 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes |
| Bullard | 36" Dynatrol | | 10809 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes |
| Bullard | 36" Spiral Drive | 1942 | 11535 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes |
| Bullard | 36" Spiral Drive | | 10874 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes |
| Bullard | 42" Cutmaster | 1954 | 6223 | BORING MILLS, VERTICAL and VTL | | Good | No | | Yes |
| Bullard | 42" Spiral Drive | 1942 | 11536 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes |
| Bullard | 42" Spiral Drive | 1946 | 8067 | BORING MILLS, VERTICAL and VTL | | Good | Yes | 42" 4-Jaw Chuck, 45" Swing - Side Up, 54" Swing Side Down, 37" Under Rail, 120 RPM, 30 HP, One (1) Five Sided Turret Head, One (1) Side Head | Yes |
| Bullard | 46" Dynatrol | 1966 | 10190 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes |
| Bullard | 52" Dynatrol | 1967 | 5860 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes |
| Bullard | 52" Dyn-Au-Tape | 1980/2006 | 11217 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 18iT | Good | Yes | | Yes |
| Bullard | 56" | 1965/97 | 11501 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc OT | Very Good | Yes | | Yes |
| Bullard | 56" Dynatrol | 1968 | 11587 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes |
| Bullard | 74" Dynatrol | | 10922 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes |
| Bullard | 86" | 2007 | 10716 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 18iT | Excellent | Yes | | Yes |
| Bullard | 86" Dynatrol | 1976 | 10794 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes |
| Cincinnati | 72" Hypro | 1952 | 10804 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes |
| Cincinnati | 84" Hypro | | 9574 | BORING MILLS, VERTICAL and VTL | | Good | No | 84" 4-Jaw Chuck, 89" Swing, 70" Under Rail, 70 RPM, 30 HP, Two (2) Swivel Type Ram Heads, Pendant Controls, Table Guarding, Power Rail Elevation, Anti-Friction Table Track, Coolant System, Floor Standing - No Pit Required | Yes |
| Cincinnati | 92" Hypro | | 8388 | BORING MILLS, VERTICAL and VTL | | Good | No | 92" 4-Jaw Chuck, 102" Swing, 64" Under Rail, 43 RPM, 40 HP, Two (2) Ram Head(s), One (1) Side Head, Pendant Controls, No Pit Required | Yes |
| Cincinnati-Gilbert | 5D | 1992 | 11040 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | Fanuc 11M | Good | Yes | | Yes |
| Cincinnati-Gilbert | J Series | 1969 | 11015 | BORING MILLS, HORIZ, FLOOR TYPE | | Very Good | Yes | | Yes |
| Craven | 84" | 1955 | 11473 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes |
| DeVlieg | 43K-72 | 1964 | 11498 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | Diatrol III | Good | Yes | 4" Spindle, 7.5 HP, 1,450 RPM, 50 Taper, 72" x 48" x 20" x 20" Travels, 40" x 72" Table, Diatrol III Two Axis Control | Yes |
| DeVlieg | JMC-4360 | 1961/1984 | 10140 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | Centroid M 400 | Good | Yes | 4" Spindle, 30 HP, 3,000 RPM, 50 Taper, 60" x 48" x 16" x 14" Travels, 48" x 60" Table, Centroid M 400, Remote Jog Handle, Steel Way Covers, Coolant Chiller, Probe System, Tapered and Straight Thread Milling, Coordinate System Rotation | Yes |
| DeVlieg | JMC-550R-80 | 1986 | 11471 | BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC | GE 2000 MC | Good | Yes | 5" Bar, 30 HP, 50 Taper, 40 ATC, 50" x 40" Table, Full 4th Rotary, Dual Pallet Shuttle, Coolant Through Spindle, Spindle Orientation, Adaptive Control | Yes |
| Doosan | Puma V-550 | 1999 | 11060 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 18T | Good | Yes | | Yes |
| Doosan | Puma-V550M | 2004 | 11136 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 21iTB | Very Good | Yes | | Yes |
| Femco | BMC-110 R2 | 2008 | 11408 | BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC | Fanuc 21iMB | Excellent | Yes | | Yes |
| Femco | WBMC-100R2 | 1996 | 11522 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | Fanuc 15M | Very Good | Yes | | Yes |
| Froriep | 10KZ300 | 1968 | 8140 | BORING MILLS, VERTICAL and VTL, CNC and NC | Allen Bradley 550 | Good | Yes | | Yes |
| Froriep | 6KE 260/610-120 | 1970 | 8200 | BORING MILLS, VERTICAL and VTL | | Very Good | No | | Yes |
| Froriep | KE-12 | 1977 | 10805 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes |
| Giddings and Lewis | 340-T | 1962 | 7600 | BORING MILLS, HORIZ, TABLE TYPE | | Good | Yes | | No |
| Giddings and Lewis | 48" | 1971/2008 | 8448 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fagor 8055 | Excellent | Yes | 48" Table, 60" Swing, 60" Under Rail, 320 RPM, 50 HP, Turret Head, 180 IPM Rapids, Heidenhain Glass Scales on All Axis, Chip Enclosure Gaurds, New Bellows Covers, Re-Conditioned Ballscrews, All Ways Re-Ground and Fitted, Coolant System, Programmable Rail Head Elevation, Toolholders, CNC Controlled Turret Head With Heidenhain Rotary Encoder Feedback, Hydraulic Clamping on Rail Head | Yes |
| Giddings and Lewis | 52" Hypro | 1947 | 10916 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes |
| Giddings and Lewis | 54" | 1980/2003 | 11340 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc 21iTB | Good | Yes | | Yes |
| Giddings and Lewis | 65 4" JEB | 1965 | 10875 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | G&L 400 | Very Good | Yes | | Yes |
| Giddings and Lewis | 70-H5-T | 1968/1998 | 11075 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | Heidenhain TNC-406 | Good | Yes | | Yes |
| Giddings and Lewis | 72" Hypro | 1955 | 11517 | BORING MILLS, VERTICAL and VTL | | Good | No | | Yes |
| Giddings and Lewis | 84" Hypro | 19?? | 10824 | BORING MILLS, VERTICAL and VTL | | Very Good | No | | Yes |
| Giddings and Lewis | DA5-T5 | 1969 | 8231 | BORING MILLS, HORIZ, TABLE TYPE | | Good | Yes | | Yes |
| Giddings and Lewis | PMC-5 | 1970/1990 | 11102 | BORING MILLS, HORIZ, TABLE TYPE | Giddings & Lewis 8000B | Very Good | Yes | | Yes |
| Giddings and Lewis | PMC-50 | 1975/83 | 11472 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | Fanuc 6M | Very Good | Yes | | Yes |
| Giddings and Lewis | Series 512 | 1991 | 10583 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Giddings & Lewis 8000 | Good | Yes | | Yes |
| Giddings and Lewis | VTC-1600 | 2008 | 11362 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Siemens 840D | Excellent | Yes | | Yes |
| Gray | RM 66 | 1980/08 | 8222 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc OiT | Rebuilt | Yes | 66" Table, 72" Swing, 66" Under Rail, 272 RPM, 50 HP, Single Turret Head, 66" 4-Jaw Manual Chuck, Chip Conveyor, Full Enclosure, Heidenhain Scales, New Control, AC Servos, 50 HP AC Spindle Motor | Yes |
| HNK | VTC-30/40E | 2001 | 11361 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 18iT | Very Good | Yes | | Yes |
| Ikegai | VT-1100 | 1981 | 11533 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 6TB | Good | Yes | | Yes |
| King | 56" | 1953/1990 | 9902 | BORING MILLS, VERTICAL and VTL, CNC and NC | Centroid T 400 | Very Good | Yes | 56" Table, 64" Swing, 42" UR, 100 RPM, 50 HP, 56" 4-Jaw Chuck, One Overhead Loading Winch, Set of Four (4) Table Jaws, Roll Around Control, Coolant System, Power Indexing Turret, Centroid T-400 Conversational Control Same As GE Fanuc | Yes |
| King | 72" | 1948 | 11486 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes |
| King | 84" | | 8390 | BORING MILLS, VERTICAL and VTL | | Very Good | No | | Yes |
| Kuraki | KBT-11 WDXA | 2001 | 11137 | BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC | Fanuc 161M | Very Good | Yes | | Yes |
| Lucas | 30T-99 | 1978/1994 | 10993 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | Fanuc OM | Very Good | Yes | | Yes |
| Lucas | 542B-120 | 1967 | 9443 | BORING MILLS, HORIZ, TABLE TYPE | | Very Good | Yes | | Yes |
| Mitsubishi | MAF-150RS | 1981/2004 | 8082 | BORING MILLS, HORIZ, FLOOR TYPE CNC and NC | Fanuc 16M | Good | No | | Yes |
| Monarch | VLN14 | 1996 | 11139 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 15TTA | Very Good | Yes | | Yes |
| Nomura | B-100WR | 1982 | 11338 | BORING MILLS, HORIZ, TABLE TYPE | | Good | Yes | | Yes |
| Nomura | BN-130-SWP-ATC | 1985 | 10806 | BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC | Fanuc 6M | Good | Yes | | Yes |
| O-M Ltd. | Omega 50 | 2002 | 11357 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 18iM | Good | Yes | | Yes |
| O-M Ltd. | TDC-12N | 1986 | 8883 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 11T | Very Good | Yes | | Yes |
| O-M Ltd. | VT-5 16N | 1995 | 11483 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 15T | Very Good | No | | Yes |
| Pensotti | KN-950 | 1968 | 9103 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | 34" 4-Jaw Chuck, 36" Swing, 35.43" Under Rail, 200 RPM, 25 HP, Turret Head, Side Head, Threading, Power Rapids, Floor Mount | Yes |
| Scharmann | FB-100 | 1972/1999 | 11496 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | Heidenhain TNC-426 CB | Good | Yes | | Yes |
| Scharmann | WF-132 | 1964/2007 | 10089 | BORING MILLS, HORIZ, FLOOR TYPE CNC and NC | Heidenhain TNC-320 | Excellent | Yes | | Yes |
| Schiess | 16DS-125 | 1981 | 10546 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 8T | Good | Yes | | Yes |
| Schiess | KE-100 | 1976/95 | 8277 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes |
| Shibaura | TSS 30/55 | 1985/2011 | 11395 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc 16T | Rebuilt | Yes | | Yes |
| Skoda | W-160A | 1963 | 8236 | BORING MILLS, HORIZ, TABLE TYPE | | Good | Yes | | Yes |
| Stanko | 2B622 | | 10979 | BORING MILLS, HORIZ, TABLE TYPE | | Very Good | Yes | | Yes |
| Summit | 48" | | 11555 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc OT | Very Good | Yes | | Yes |
| Summit | 48" | | 11555 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc OT | Very Good | Yes | | Yes |
| Summit | 59" | 1975 | 11445 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes |
| Summit | SC-17 DC | 1984 | 11450 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes |
| Toshiba | BTD-13.FR22 | 2000 | 11372 | BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC | Tosnuc 888 | Good | Yes | | Yes |
| Toshiba | TMC-13 | 1985/2011 | 11017 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 32Ti | Rebuilt | Yes | | Yes |
| Toshiba | TMC-16 | 1982/2011 | 11392 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 18T | Rebuilt | Yes | | Yes |
| Toshiba | TMD-16 APC | 1996 | 11363 | BORING MILLS, VERTICAL and VTL, CNC W-MILLING and ATC | Fanuc 15TA | Very Good | Yes | | Yes |
| Toshiba | TUE-15 | 1997 | 11083 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 18T | Excellent | | | Yes |
| Toshiba | TUE-15 | 2001 | 10913 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 18T | Very Good | Yes | | Yes |
| Toshiba | TUE-20 | 2005 | 10423 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 18M | Very Good | Yes | | Yes |
| Union | BFT-110 | 1987/2000 | 11470 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | Heidenhain TNC-360 | Good | Yes | | Yes |
| Union | BFT-13/6 | 1995 | 10921 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | Fanuc 16iM | Very Good | No | | Yes |
| Union | BFT-130 | 1985 | 11452 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | Heidenhain TNC-155 | Very Good | Yes | | Yes |
| Union | BFT-130/6 | 1995 | 11469 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | Fanuc 16iM | Very Good | No | | Yes |
| Union | CBFK-150 | 1998/2002 | 11143 | BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC | Fanuc 16MA | New | Yes | | Yes |
| Union | KCX-130 | 2002 | 10586 | BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC | Heidenhain TNC-426 | Very Good | Yes | | Yes |
| Vanguard | TAC-16A | 2007 | 11072 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc Oi | Excellent | Yes | | Yes |
