| Manufacturer | Model | Year | Machine ID | Type Machine | Control | Condition | U / P | ShortSpecs | Photos | Asking Price |
| Axelson | 41" x 72" | 1962 | 11502 | LATHES, ENGINE | | Good | Yes | | Yes | $34,500.00 |
| Behringer | HBP-400 | 1982 | 11572 | SAWS, BAND, HORIZONTAL | | Good | Yes | | Yes | $14,500.00 |
| Bullard | 36" Spiral Drive | 1942 | 11535 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes | $16,500.00 |
| Bullard | 42" Spiral Drive | 1942 | 11536 | BORING MILLS, VERTICAL and VTL | | Good | Yes | | Yes | $19,500.00 |
| Bullard | 56" Dynatrol | 1968 | 11587 | BORING MILLS, VERTICAL and VTL | | Very Good | Yes | | Yes | |
| Bullard | 56" | 1965/97 | 11501 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc OT | Very Good | Yes | | Yes | $119,500.00 |
| Chevalier | 2040B | 2002 | 11516 | MILLERS, VERT-UNIVERSAL NC and CNC | Dynapath Delta 30 | Very Good | Yes | | Yes | $12,500.00 |
| Daewoo | Puma-400B | 1999 | 11542 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 18T | Very Good | Yes | | Yes | $108,000.00 |
| Daewoo | Puma-8HC | 1995 | 11584 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc OTC | Good | Yes | | Yes | $24,500.00 |
| Daewoo | DMV-500 | 1999 | 11590 | MACHINING CENTERS, VERTICAL, CNC | Mitsubishi Meldas 520M | Good | Yes | | Yes | $42,500.00 |
| DeVlieg | 43K-72 | 1964 | 11498 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | Diatrol III | Good | Yes | 4" Spindle, 7.5 HP, 1,450 RPM, 50 Taper, 72" x 48" x 20" x 20" Travels, 40" x 72" Table, Diatrol III Two Axis Control | Yes | $28,000.00 |
| Doosan | Lynx-220LC | 2011 | 11544 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 21T | Like New | Yes | | Yes | $62,000.00 |
| Emco Maier | Emco-Turn 365 | 1998 | 11505 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Siemens 840D | Excellent | Yes | | Yes | $265,000.00 |
| Fadal | VMC-6030 HT | 2009 | 11582 | MACHINING CENTERS, VERTICAL, CNC | Fanuc 18iMB | Very Good | Yes | | Yes | $92,500.00 |
| Femco | WBMC-100R2 | 1996 | 11522 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | Fanuc 15M | Very Good | Yes | | Yes | $115,000.00 |
| Fryer | MB-11 | 1992 | 11551 | MILLERS, VERT-UNIVERSAL NC and CNC | Anilam 1100 | Good | | | Yes | $8,500.00 |
| Giddings and Lewis | 72" Hypro | 1955 | 11517 | BORING MILLS, VERTICAL and VTL | | Good | No | | Yes | $229,500.00 |
| Giddings and Lewis | HMC-170 | 2002 | 11509 | MACHINING CENTERS, HORIZONTAL CNC | Siemens 840D | Excellent | Yes | | Yes | $184,500.00 |
| Gisholt | #5 | 1965 | 11507 | LATHES, TURRET - RAM TYPE | | Good | Yes | | On Way | |
| Gisholt | 1L | 1964 | 11508 | LATHES, TURRET - SADDLE TYPE | | Good | Yes | | On Way | |
| Haas | SL-20T | 2005 | 11565 | LATHES, CNC, 2-AXIS, UNIVERSAL | Haas 32 BIT | Very Good | Yes | | Yes | $39,900.00 |
| Haas | SL-20T | 2001 | 11545 | LATHES, CNC, 2-AXIS, UNIVERSAL | Haas 32 BIT | Very Good | Yes | | Yes | $34,900.00 |
| Haas | TL-25 | 2007 | 11503 | LATHES, CNC, 2-AXIS, W-SUB-SPINDLE | Haas 32 BIT | Very Good | Yes | | Yes | $89,500.00 |
| Haas | HS-1RP | 1998 | 11494 | MACHINING CENTERS, HORIZONTAL CNC | Haas 32 BIT | Good | Yes | | Yes | $40,000.00 |
| Haas | VF-2 | 1999 | 11497 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Fair | Yes | | Yes | $34,500.00 |
| Haas | VF-2 | 1997 | 11581 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Good | Yes | | Yes | $31,500.00 |
| Haas | VF-3 | 1997 | 11492 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Good | Yes | | Yes | $36,000.00 |
| Haas | VF-4 | 1999 | 11495 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | | Yes | $39,900.00 |
| Haas | VF-5/50 | 1999 | 11567 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Good | Yes | 52" x 23" Table, 50" x 26" x 25" Travels, 5,000 RPM, 50 Taper, 30 HP, 20 ATC, Programmable Coolant, Rigid Tapping, Remote Pulse Generator, Geared Head, 4th Axis Drive, Quick Code, Coolant Through Spindle (300 psi) | Yes | $50,000.00 |
| Haas | VF-5/50 | 2007 | 11513 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | 52" x 23" Table, 50" x 26" x 25" Travels, 7,500 RPM, 50 Taper, 30 HP, 24 ATC, Programmable Coolant, Rigid Tapping, Chip Auger, 4th Axis Interface (Brushless), External High-Voltage Isolation Transformer, Remote Jog Handle, USB Port, Two (2) Speed Geared Head, Quick Code, Tool Holders, Haas HRT-310 Rotary Table | Yes | $102,000.00 |
| Haas | VF-O | 1997 | 11586 | MACHINING CENTERS, VERTICAL, CNC | Haas 32 BIT | Very Good | Yes | | Yes | $24,500.00 |
| Haas | HRT-310 | 1999 | 11580 | TABLES, NC and CNC | | Good | Yes | 12.2" Round Table, Indexing 360,000°, Brush Servo | No | $6,500.00 |
| Hardinge | Conquest TT-65 MC | 2000 | 11566 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iT | Very Good | Yes | | Yes | $105,000.00 |
| Hardinge | Conquest TT-65Y | 2001 | 11554 | LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE | Fanuc 18iT | Very Good | Yes | | On Way | $110,000.00 |
| Hitachi-Seiki | HS-630 | 1999 | 11530 | MACHINING CENTERS, HORIZONTAL CNC | Seicos Sigma 16M | Very Good | Yes | Two 24.8" Pallets, 360,000° Indexing, 2,640 Lbs Table Load, 33.5" x 31.5" x 33.5" Travels, 10,000 RPM, 50 Taper, 40 HP, 60 ATC, Coolant Through Spindle, Synchronized Tapping, Helical Interpolation, Chip Conveyor, Remote Jog Handle | Yes | $108,000.00 |
| Hwacheon | Mega 95 | 2002 | 11574 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc 21TB | Very Good | Yes | | Yes | $139,500.00 |
| Ikegai | VT-1100 | 1981 | 11533 | BORING MILLS, VERTICAL and VTL, CNC W-ATC | Fanuc 6TB | Good | Yes | | Yes | $99,500.00 |
| Kasto | SBA-320 | 1998 | 11573 | SAWS, BAND, HORIZONTAL | | Very Good | Yes | | Yes | $24,500.00 |
| Kitako | VT4-350 | 1999 | 11583 | LATHES, CNC, 4-AXIS, CHUCKER | Fanuc 18TB | Very Good | Yes | Maximum Turning Diameter 7.9", Maximum Turning Length 7.9", 4,000 RPM, 10 HP, Two 6 Station Turrets, Four (4) 8" 3-Jaw Kitagawa Chucks with Actuators, RS-232, Spindle Orientation, Chip Conveyor, Coolant System | Yes | $249,500.00 |
| Kitamura | HX-400i | 1999 | 11541 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 16iM | Good | Yes | | Yes | $89,500.00 |
| Leadwell | LTC-30 CP | 1998 | 11500 | LATHES, CNC, 2-AXIS, UNIVERSAL | Fanuc OTC | Very Good | Yes | | Yes | $59,500.00 |
| Lehmann | 36 | 1945 | 11534 | LATHES, ENGINE | | Good | Yes | | Yes | $39,500.00 |
| Mattison | 16" x 48" | 1962 | 11491 | GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ. | | Good | No | | Yes | $10,500.00 |
| Mazak | Quick Turn Nexus-200 | 2004 | 11540 | LATHES, CNC, 2-AXIS, UNIVERSAL | Mazatrol Fusion 640 T | Good | Yes | | Yes | $49,900.00 |
| Mazak | Quick Turn-18N | 1993 | 11562 | LATHES, CNC, 2-AXIS, UNIVERSAL | Mazatrol T-32B | Very Good | Yes | | Yes | $29,500.00 |
| Mazak | Integrex 300 Y | 2000 | 11527 | LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | Mazatrol Fusion 640 T | Good | Yes | | Yes | $157,000.00 |
| Mazak | Super Quick Turn-15M II | 1996 | 11506 | LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING | Mazatrol T-PLUS | Very Good | Yes | | Yes | $39,500.00 |
| Mazak | Integrex 400 SY | 2006 | 11564 | LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE | Mazatrol Fusion 640 T | Very Good | Yes | | Yes | $395,000.00 |
| Mitsui-Seiki | HU-63A | 1999 | 11523 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 16MC | Very Good | Yes | | Yes | $129,500.00 |
| Mitutoyo | FN-905 | 1987 | 11556 | COORDINATE MEASURING MACHINES | | Very Good | Yes | | Yes | $12,500.00 |
| Mori-Seiki | CL-200 | 1998 | 11531 | LATHES, CNC, 2-AXIS, CHUCKER | Mori-Seiki MSC-803L | Very Good | Yes | | Yes | $52,500.00 |
| Mori-Seiki | CL-200B | 1998 | 11532 | LATHES, CNC, 2-AXIS, UNIVERSAL | Mori-Seiki MSC-803L | Very Good | Yes | | Yes | $57,500.00 |
| Mori-Seiki | HVM-630 | 2005 | 11528 | MACHINING CENTERS, HORIZONTAL CNC | Mori-Seiki MSG-502 | Very Good | Yes | | Yes | $365,000.00 |
| Mori-Seiki | MV-55/50 | 1995 | 11578 | MACHINING CENTERS, VERTICAL, CNC | Fanuc MF-M4 | Good | Yes | | Yes | $52,500.00 |
| Mori-Seiki | MV-653/40 APC | 2008 | 11538 | MACHINING CENTERS, VERTICAL, CNC W-PALLETS | Fanuc 16MA | Excellent | Yes | | Yes | $310,000.00 |
| Niigata | HN-80C | 1996 | 11490 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 15M | Good | Yes | | Yes | $129,000.00 |
| Nissan | Super Flex 3D | 2001 | 11592 | BENDERS, PIPE and TUBE, CNC | | Excellent | Yes | | Yes | $45,000.00 |
| Okuma | Crown 762 BB | 1997 | 11569 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-700L | Good | Yes | | Yes | $52,500.00 |
| Okuma | Crown L-1060 SB | 1997 | 11499 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-700L | Very Good | Yes | | Yes | $49,500.00 |
| Okuma | LB-15 BB | 1995 | 11570 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-5020L | Fair | Yes | | Yes | $24,500.00 |
| Okuma | LB-45 II SBB 1000 C | 2008 | 11520 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-P200L | Very Good | Yes | | Yes | $395,000.00 |
| Okuma | LNC-8 | 1993 | 11489 | LATHES, CNC, 2-AXIS, UNIVERSAL | OSP-5020L | Very Good | Yes | | Yes | $19,500.00 |
| Okuma | LT-15 M | 1995 | 11568 | LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE | OSP-5020L | Good | Yes | | Yes | $59,900.00 |
| Okuma | MacTurn 350-BBW 2S / 1500 | 2005 | 11521 | LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE | OSP-E100L | Very Good | Yes | | Yes | $379,900.00 |
| Okuma | MX-60HB | 1998 | 11571 | MACHINING CENTERS, HORIZONTAL CNC | OSP-7000M | Very Good | Yes | | Yes | $179,500.00 |
| Pines | #1 | 1981/2000 | 11588 | BENDERS, PIPE and TUBE | | Very Good | Yes | | Yes | $15,500.00 |
| Pope | 16-2 | | 11524 | ROLLS, PLATE BENDING, PYRAMID TYPE | | Good | Yes | | Yes | $42,500.00 |
| Reed | A22 | | 11525 | THREAD ROLLERS | | Good | Yes | | Yes | $15,000.00 |
| Reed | A22 B | 1979 | 11557 | THREAD ROLLERS | | Good | Yes | | Yes | $18,500.00 |
| Scharmann | FB-100 | 1972/1999 | 11496 | BORING MILLS, HORIZ, TABLE TYPE CNC and NC | Heidenhain TNC-426 CB | Good | Yes | | Yes | $125,000.00 |
| Summit | 48" | | 11555 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc OT | Very Good | Yes | | Yes | $199,500.00 |
| Summit | 48" | | 11555 | BORING MILLS, VERTICAL and VTL, CNC and NC | Fanuc OT | Very Good | Yes | | Yes | $199,500.00 |
| Toyoda | FH-80 | 1998 | 11585 | MACHINING CENTERS, HORIZONTAL CNC | Fanuc 15M | Very Good | Yes | | On Way | $210,000.00 |
