| Manufacturer | Model | Year | Machine ID | Type Machine | Control | Condition | U / P | ShortSpecs | Photos | List |
| Amera-Seiki | TS-42 | 2006 | 8634 | LATHES, CNC, 4-AXIS, CHUCKER | Mitsubishi 64SM | Demo | Yes | | Yes | 2006 Amera-Seiki TS-42 Mitsubishi 64SM |
| Kitako | MT4-200 | 1995 | 8810 | LATHES, CNC, 4-AXIS, CHUCKER | Fanuc 18T | Good | Yes | Maximum Turning Diameter 7.8", Maximum Turning Length 3.9", 3,200 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10" 3-Jaw Chucks, Transformer, Chip Conveyor, Mist Collector | Yes | 1995 Kitako MT4-200 Fanuc 18T |
| Kitako | MT4-200 | 1996 | 8809 | LATHES, CNC, 4-AXIS, CHUCKER | Fanuc 18T | Good | Yes | Maximum Turning Diameter 7.8", Maximum Turning Length 3.9", 3,200 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10" 3-Jaw Chucks, Transformer, Chip Conveyor, Mist Collector | Yes | 1996 Kitako MT4-200 Fanuc 18T |
| Kitako | MT4-200 | 1997 | 9896 | LATHES, CNC, 4-AXIS, CHUCKER | Fanuc 18T | Very Good | Yes | | Yes | 1997 Kitako MT4-200 Fanuc 18T |
| Kitako | MT4-200 | 2003 | 9295 | LATHES, CNC, 4-AXIS, CHUCKER | Fanuc 18iTA | Good | Yes | Maximum Turning Diameter 7.8", Maximum Turning Length 3.9", 4,000 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10" 3-Jaw Chucks, Air Blow, Chip Conveyor, Coolant System | Yes | 2003 Kitako MT4-200 Fanuc 18iTA |
| Kitako | MT4-200 | 2003 | 9296 | LATHES, CNC, 4-AXIS, CHUCKER | Fanuc 18iTA | Good | Yes | Maximum Turning Diameter 7.8", Maximum Turning Length 3.9", 4,000 RPM, 20 HP, Two 8 Station Turrets, Four (4) 10" 3-Jaw Chucks, Air Blow, Chip Conveyor, Coolant System | Yes | 2003 Kitako MT4-200 Fanuc 18iTA |
| Kitako | VT4-200 | 2000 | 9454 | LATHES, CNC, 4-AXIS, CHUCKER | Fanuc 18iT | Very Good | Yes | Maximum Turning Diameter 7.9", Maximum Turning Length 7.9", 4,000 RPM, 10 HP, Two 6 Station Turrets, Four (4) 8" 3-Jaw Kitagawa Chucks with Actuators, RS-232, Spindle Orientation, Chip Conveyor, Coolant System | Yes | 2000 Kitako VT4-200 Fanuc 18iT |
| Mori-Seiki | RL-203 | 2003 | 9254 | LATHES, CNC, 4-AXIS, CHUCKER | Mitsubishi MSG-803 | Very Good | Yes | 11.8" Swing, 9.44" Turning Dia., 5.9" Turning Length, 4,500 RPM, 15 HP, 2-8 Station Turrets, Two 8" 3-Jaw Hydraulic Chucks, Chip Conveyor, Coolant Through Spindle, Spindle Orientation, Fourteen (14) Station Stocker, LG-05 Gantry Load / Unload System | Yes | 2003 Mori-Seiki RL-203 Mitsubishi MSG-803 |
| Murata | MW-300G | 1997 | 8998 | LATHES, CNC, 4-AXIS, CHUCKER | Fanuc 16TT | Good | Yes | 11.6" Swing, 13.385 Distance Between Spindle, 6,000 RPM, 14 HP,8 Sta. Turrets, Two 6" 2-Jaw Hydraulic Chucks, Chip Conveyor, Two Multi-Position Indexing Gantry Loader With Turn Around Stations, Right Hand or Left Discharge Available, Machine Sat Idle For Eight (8) Years - Recently Gone Through | Yes | 1997 Murata MW-300G Fanuc 16TT |
| Okuma | LU-35 BB | 1997 | 9954 | LATHES, CNC, 4-AXIS, CHUCKER | OSP-7000L | Very Good | Yes | | Yes | 1997 Okuma LU-35 BB OSP-7000L |
| Warner and Swasey | 2-SC-15 | 1978 | 9029 | LATHES, CNC, 4-AXIS, CHUCKER | Allen Bradley 7360 | Good | No | 17 3/8" Swing, 1,178 RPM, 4.5" Spindle Bore, 50 HP, Twin Turret, 15" 3-Jaw Hydraulic Chuck, Chip Conveyor, Steady Rest, Miscellaneous Tooling, Manuals, Behind the Tape Reader | No | 1978 Warner and Swasey 2-SC-15 Allen Bradley 7360 |
