MazakMachines.Net
All Used The Mazak Machine Tools You Need - All Of The Time
 Office (352) 799-8398
Fax (352) 799-0315
Click Here to Email Us
Copyright © 2012 Machine Tools 24/7.  All Rights Reserved.
Click Here to Bookmark this Site
All Machines Available By Type

You Can Sort The Table Below By Clicking on The Column Header (table pre-sorted by Mfg, Model, then Year)
Click On The Machine ID Number Below To View Machine Quote & Photos
ManufacturerModelYearMachine IDType MachineControlConditionU / PShortSpecsPhotosList
DaewooPuma-240 MA200416101LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc 18iTAGoodYes21.65" Swing, 15.4" SOC, 11.4" Turn Dia., 32.3" Turn Length, 6,000 RPM, 1.81" Bar Cap., 15 HP, 6.5" 3- Jaw Chuck, Live Milling, More…Yes2004 Daewoo Puma-240 MA Fanuc 18iTA
DoosanLynx-220 LYC201416696LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc OiTDVery GoodYesSwing 20.08", Swing Over C.S. 11.42", Maximum Turning Diameter 12.59", Length 20.7", 4,000 RPM, 2.56" Bar Cap., 20 HP, 12 Sta. Turret, Bar Feed, More.Yes2014 Doosan Lynx-220 LYC Fanuc OiTD
DoosanLynx-220 LYC201716574LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc i SeriesExcellentYes23.6" Swing, 11.8" Turn Dia., 20.1" Turn Length, 4,500 RPM, 20 HP, 12 Stations, 8" 3-Jaw Hydraulic Chuck, Tool Setter, Chip Conveyor, More.Yes2017 Doosan Lynx-220 LYC Fanuc i Series
DoosanPuma-2000 SY200716580LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc 31iVery GoodYes23.622" Swing, 21.6535" SOC, 5,000 RPM, 2.625" Bar Cap., 20 HP, 12 Sta. Turret, 8" 3-Jaw Chuck on Main Collet Chuck on Sub, Parts Catcher, Bar Feed, Chip Conveyor, MoreYes2007 Doosan Puma-2000 SY Fanuc 31i
DoosanPuma-2500 LY201116550LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc 18iTBVery GoodYes Yes2011 Doosan Puma-2500 LY Fanuc 18iTB
DoosanPuma-2600 M201116782LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc OiTDGoodYes30.7" Swing, 24.8" Turn Dia. Chucking, 29.9", Shaft 14.8", 29.9" Turn Length, 4,500 RPM, 30 HP, 12 Stations, 10" 3-Jaw Hydraulic Chuck, Chip Conveyor, More.Yes2011 Doosan Puma-2600 M Fanuc OiTD
DoosanPuma-400 MB200116207LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc 18iTGoodYes Yes2001 Doosan Puma-400 MB Fanuc 18iT
DoosanPuma-480 XLM201516124LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc OiTExcellentYes Yes2015 Doosan Puma-480 XLM Fanuc OiT
DoosanPuma-600 LM201315651LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc 31iTVery GoodYes21" 3-Jaw Hydraulic Chuck, 18.5" x 127.36" Travels, 4.6" Bar Cap. 60 HP, Tool Presetter, Fully Programmable Tailstock, Chip Conveyor, Hydraulic Steady Rest, More..Yes2013 Doosan Puma-600 LM Fanuc 31iT
HaasSL-20 TM200516757LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGHaas ControlGoodYesSwing 23", Swing Over Cross Slide 9.5", Maximum Turning Diameter 10", Length 20", 2" Bar Cap., 4,000 RPM, 30 HP, 12 Sta. Turret, Tailstock,Collet Chuck, Parts Catcher, More..Yes2005 Haas SL-20 TM Haas Control
HaasSL-20 TM200716490LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGHaas ControlVery GoodYesSwing 23", Swing Over Cross Slide 9.5", Maximum Turning Diameter 10", Length 20", 2" Bar Cap., 4,000 RPM, 30 HP, 12 Sta. Turret, Tailstock,Collet Chuck, Parts Catcher, Haas Servo Bar 300 Bar Feed, More..Yes2007 Haas SL-20 TM Haas Control
HaasSL-30TM200616615LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGHaas ControlGoodYesSwing Over Bed 30", Swing Over Saddle 19", Maximum Turning Diameter 14.5", Length 34", 3,400 RPM, 30 HP, 12 Sta. Turret, 10" 3-Jaw Chuck, Programmable Tailstock, Rigid Tapping, Tool Pre-Setter, Parts CatcherYes2006 Haas SL-30TM Haas Control
HaasSL-30TM BB200516759LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGHaas ControlGoodYesSwing Over Bed 30", Swing Over Saddle 19", Maximum Turning Diameter 14.5", Length 34", 2,400 RPM, 30 HP, 12 Sta. Turret, 15" 3-Jaw Hydraulic Chuck, Two (2) Speed Gearbox, Rigid Tapping, High Intensity Lighting, Programmable Tailstock, USB Port, Spindle Orientation, 1 MB Program Memory, Big Bore Spindle Option, Tool Per-SetterYes2005 Haas SL-30TM BB Haas Control
HaasST-20 M SS201116736LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGHaas ControlVery GoodYes Yes2011 Haas ST-20 M SS Haas Control
HaasST-20T Y201416639LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGHaas ControlVery GoodYesSwing 31.75", Swing Over Cross Slide 20.75", Maximum Turning Diameter 15", Length 21", 2" Bar Cap., 4,000 RPM, 20 HP, 12 Sta. Turret, Tailstock, 8" 3-Jaw Chuck, Chip Conveyor, Tool Setter, Low Hours, More...Yes2014 Haas ST-20T Y Haas Control
HwacheonHi-Tech 450 AYLMC201216576LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc OiTDVery GoodYes27.56" Swing, 16.54" Turn Dia., 53.15" Turn Length, 3,500 RPM, 30 HP, 12 Stations, 10" 3-Jaw Hydraulic Chuck, Tool Setter, Chip Conveyor, Tailstock, More.Yes2012 Hwacheon Hi-Tech 450 AYLMC Fanuc OiTD
MazakCybertech Turn-4500 M BB200716745LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol Fusion 640 MT ProGoodYesSwing 33.8", Swing Over C.S. 27.5", Maximum Turning Diameter 31.9", Length 82", 1,000 RPM, 10.80" Bar Cap., 50 HP, 12 Sta. Turret, 31.5" 3-Jaw Pneumatic Chuck, C-Axis, More.Yes2007 Mazak Cybertech Turn-4500 M BB Mazatrol Fusion 640 MT Pro
MazakCybertech Turn-4500 M BB200816058LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol Fusion 640 MTVery GoodYes Yes2008 Mazak Cybertech Turn-4500 M BB Mazatrol Fusion 640 MT
MazakIntegrex E-410 H200216211LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol Fusion 640 M ProGoodYes Yes2002 Mazak Integrex E-410 H Mazatrol Fusion 640 M Pro
MazakQuick Turn Nexus-200 M200416292LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol Fusion 640 TVery GoodYes Yes2004 Mazak Quick Turn Nexus-200 M Mazatrol Fusion 640 T
MazakQuick Turn Nexus-250 MY II200916258LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol MatrixVery GoodYes Yes2009 Mazak Quick Turn Nexus-250 MY II Mazatrol Matrix
MazakQuick Turn Nexus-300 M200716599LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol MatrixVery GoodYesSwing 29.5", Swing Over Cross Slide 19.88", Maximum Turning Diameter 16.53", Length 48", 3" Bar Cap., 4,000 RPM, 35 HP, 12 Sta. Turret, Tailstock, 10" 3-Jaw Chuck, Chip Conveyor, Live Tooling, More..Yes2007 Mazak Quick Turn Nexus-300 M Mazatrol Matrix
MazakQuick Turn Nexus-350 M II200816491LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol MatrixVery GoodYesSwing 29.5", Swing Over Cross Slide 19.88", Maximum Turning Diameter 16.53", Length 60", 4" Bar Cap., 3,300 RPM, 40 HP, 12 Sta. Turret, Tailstock, 15" 3-Jaw Chuck, Chip Conveyor, SMW Steady Rest, More..Yes2008 Mazak Quick Turn Nexus-350 M II Mazatrol Matrix
MazakQuick Turn Nexus-450 M II201216619LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol MatrixVery GoodYesSwing Over Bed 33.268", Swing Over Saddle 24.2", Maximum Turning Diameter 22.835", Length 82.64", 2,000 RPM, 50 HP, 12 Sta. Turret, 18.11" 3-Jaw Pneumatic Chuck, Programmable Tailstock, Rigid Tapping, Tool Pre-Setter, More.Yes2012 Mazak Quick Turn Nexus-450 M II Mazatrol Matrix
MazakQuick Turn Smart-350 M200516357LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMazatrol SmartVery GoodYesSwing 28.35", Swing Over Cross Slide 19", Maximum Turning Diameter 16.5", Length 48.72", 4" Bar Cap., 4,00 RPM, 40 HP, 12 Sta. Turret, Tailstock, 12" 3-Jaw Chuck, Chip Conveyor, Live Tooling, More..Yes2005 Mazak Quick Turn Smart-350 M Mazatrol Smart
Mori-SeikiNL-2000 Y200416698LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSX-850 IIGoodYes Yes2004 Mori-Seiki NL-2000 Y Mori-Seiki MSX-850 II
Mori-SeikiNL-2500 MC - 1250200616746LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSX-850 IIIGoodYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.01", Length 51", 4,000 RPM, 3.1" Bar Cap., 20 HP, 12 Sta. Turret, 10" 3-Jaw Hydraulic Chuck, C-Axis, More.Yes2006 Mori-Seiki NL-2500 MC - 1250 Mori-Seiki MSX-850 III
Mori-SeikiNL-2500 MC - 1250200616746LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSX-850 IIIGoodYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.01", Length 51", 4,000 RPM, 3.1" Bar Cap., 20 HP, 12 Sta. Turret, 10" 3-Jaw Hydraulic Chuck, C-Axis, More.Yes2006 Mori-Seiki NL-2500 MC - 1250 Mori-Seiki MSX-850 III
Mori-SeikiNL-2500 MC - 700200516261LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSX-850 IIIGoodYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.01", Length 29", 4,000 RPM, 3.1" Bar Cap., 20 HP, 12 Sta. Turret, 10" 3-Jaw Hydraulic Chuck, C-Axis, More.Yes2005 Mori-Seiki NL-2500 MC - 700 Mori-Seiki MSX-850 III
Mori-SeikiNL-3000 Y - 1250200816717LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSX-850 IIIVery GoodYesSwing 39.17", Swing Over C.S. 32.48", Maximum Turning Diameter 16.9", Length 49.6", 3,000 RPM, 3.5" Bar Cap., 30 HP, 12 Sta. Turret, Touch Setter, 15" 3-Jaw Hydraulic Chuck, Bar Feed, More.Yes2008 Mori-Seiki NL-3000 Y - 1250 Mori-Seiki MSX-850 III
Mori-SeikiNL-3000 Y - 2000200816141LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSX-850 IIIGoodYes Yes2008 Mori-Seiki NL-3000 Y - 2000 Mori-Seiki MSX-850 III
Mori-SeikiNL-3000 Y - 2000200816141LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSX-850 IIIGoodYes Yes2008 Mori-Seiki NL-3000 Y - 2000 Mori-Seiki MSX-850 III
Mori-SeikiSL-403 CMC200816735LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSX-501 IIIVery GoodYes Yes2008 Mori-Seiki SL-403 CMC Mori-Seiki MSX-501 III
Mori-SeikiSL-403 CMC201516306LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc 32iBExcellentYes Yes2015 Mori-Seiki SL-403 CMC Fanuc 32iB
Mori-SeikiSL-600 BMC - 1000200015729LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSC-501 (Fanuc 21)GoodNo Yes2000 Mori-Seiki SL-600 BMC - 1000 Mori-Seiki MSC-501 (Fanuc 21)
Mori-SeikiSL-600 CMC199816774LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGMori-Seiki MSC-501 (Fanuc 21)GoodYes39.1" Swing, 36.6" Turning Diameter, 700 RPM, 10.3" Bar Cap., 19.09" x 43.3" Travels, 24" 3-Jaw Pneumatic SMW Chucks Front and Rear, Chip Conveyor, Twenty Foot (20') Bar Stand, MoreYes1998 Mori-Seiki SL-600 CMC Mori-Seiki MSC-501 (Fanuc 21)
Mori-SeikiTL-40 MC - 3000198816605LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc 6TBFairYes24" Swing, 14.9" SOC, 17.3" Turning Dia., 114.4" Turning Length, 2,000 RPM, 3.6" Bar Cap., 30 HP, Chip Conveyor, One (1) Steady Rest, Milling, Chip Conveyor, MoreYes1988 Mori-Seiki TL-40 MC - 3000 Fanuc 6TB
OkumaCaptain L-370 M200516531LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGOSP-E100LGoodYesSwing Over Bed 20.8", Swing Over Saddle 16.54", Maximum Turning Diameter 13.38", Length 20", 3,800 RPM, 30 HP, 12 Sta. Turret, Live ToolingYes2005 Okuma Captain L-370 M OSP-E100L
OkumaGenos L-200 EM201416340LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGOSP-P200LARVery GoodYes Yes2014 Okuma Genos L-200 EM OSP-P200LAR
OkumaLB-300 M200016561LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGOSP-U100LGoodYes Yes2000 Okuma LB-300 M OSP-U100L
OkumaLB-3000 EX II MY201316705LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGOSP-P300LVery GoodYes Yes2013 Okuma LB-3000 EX II MY OSP-P300L
PinnaclePK-L210C201916647LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLINGFanuc OiTDNewYesSwing 20.47", Swing Over Cross Slide 14.17", Maximum Turning Diameter 17.3", Length 24", 3.03" Bar Cap., 3,500 RPM, 25 HP, 12 Sta. Turret, Tailstock, 10" 3-Jaw Chuck, Chip Conveyor, Servo Turret, Two (2) Year WarrantyYes2019 Pinnacle PK-L210C Fanuc OiTD