MazakMachines.Net
All Used The Mazak Machine Tools You Need - All Of The Time
 Office (352) 799-8398
Fax (352) 799-0315
Click Here to Email Us
Copyright © 2012 Machine Tools 24/7.  All Rights Reserved.
Click Here to Bookmark this Site
All Machines Available By Type

You Can Sort The Table Below By Clicking on The Column Header (table pre-sorted by Mfg, Model, then Year)
Click On The Machine ID Number Below To View Machine Quote & Photos
ManufacturerModelYearMachine IDType MachineControlConditionU / PShortSpecsPhotosList
DaewooPuma-1500 SY200516444LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBGoodYes23.6"" Swing, 12.9" Turn Dia., 33.8" Centers, 6,000 RPM, 20 HP, 12 Sta. Turret, Collet Chuck on Main and Sub-Spindle, Chip Conveyor, Tool Presetter, Part Catcher, Parts Conveyor, MoreYes2005 Daewoo Puma-1500 SY Fanuc 18iTB
DaewooPuma-2000 SY200216692LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBGoodYesSwing 23.62", Swing Over C.S. 21.6", Maximum Turning Diameter 12.99", Length 20.08", 5,000 RPM, 2.56" Bar Cap., 20 HP, 12 Sta. Turret, Bar Feed, More.Yes2002 Daewoo Puma-2000 SY Fanuc 18iTB
DMG MoriNLX-1500 SY - 500201816798LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki CelosExcellentYes Yes2018 DMG Mori NLX-1500 SY - 500 Mori-Seiki Celos
DMG MoriNLX-2000 SY201616603LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki CelosExcellentYes36.37" Swing, 29.72" SOC, 14.01" Turning Dia., 19.6" Turning Length, 5,000 RPM, 2.5" Bar Cap., 30 HP, Chip Conveyor, Bar Feed Interface, Twenty (20) Station Turret Option, More..Yes2016 DMG Mori NLX-2000 SY Mori-Seiki Celos
DMG MoriNLX-2500 SY - 1250201716768LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEDMG Mori CelosLike NewYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.01", Length 49.4", 4,000 RPM, 3.1" Bar Cap., 25 HP, 12 Sta. Turret, Scales on X, Y and Z, Steady Rest, More.Yes2017 DMG Mori NLX-2500 SY - 1250 DMG Mori Celos
DMG MoriNLX-2500 SY - 700201116585LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-853 IVVery GoodYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.4", Length 27.75", 4,000 RPM, 3.1" Bar Cap., 25 HP, 12 Sta. Turret, Parts Catcher, Bar, More.Yes2011 DMG Mori NLX-2500 SY - 700 Mori-Seiki MSX-853 IV
DMG MoriNLX-2500 SY - 700201516701LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMitsubishi M730UMExcellentYes Yes2015 DMG Mori NLX-2500 SY - 700 Mitsubishi M730UM
DMG MoriNZX-1500 SY - 800201616666LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki CelosLike NewYes Yes2016 DMG Mori NZX-1500 SY - 800 Mori-Seiki Celos
DoosanPuma-2600 SY201816548LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 31iTDExcellentYes Yes2018 Doosan Puma-2600 SY Fanuc 31iTD
HaasDS-30 SSY201116558LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEHaas ControlVery GoodYesSwing Over Bed 31.75", Swing Over Saddle 20.75", Maximum Turning Diameter 16", Length 18", 4,800 RPM, 30 HP, 12 Sta. Turret, Y-Axis, Sub-Spindle, Live Tooling, More..Yes2011 Haas DS-30 SSY Haas Control
HaasTL-25200616748LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEHaas ControlGoodYesSwing 30", Swing Over C.S. 14.7", Maximum Turning Diameter 16", Length 36", 3,400 RPM, 3" Bar Cap., 30 HP, 12 Sta. Turret, 10" 3-Jaw Hydraulic Chuck, C-Axis, More.Yes2006 Haas TL-25 Haas Control
HardingeConquest T-42199416369LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18TVery GoodYes21.2" Swing, 14.5" SOC, 5,000 RPM, 1.625" Bar Cap., 10 HP, 12 Sta. Turret, 16C Collet Chuck on Main and Sub, Toolsetter, Parts Catcher, MoreYes1994 Hardinge Conquest T-42 Fanuc 18T
HardingeElite 51 MS200815681LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBVery GoodYes Yes2008 Hardinge Elite 51 MS Fanuc 18iTB
HardingeQuest 6-42 SP200615420LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 160iTGoodYes Yes2006 Hardinge Quest 6-42 SP Fanuc 160iT
HardingeSR-150 MSY200716764LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc i Series SRGoodYesSwing 22.44", Swing Over Cross Slide 14.6", Maximum Turning Diameter 12.15", Length 20.5", 6,000 RPM, 20 HP, 12 Station Turret, Collet Chuck On Main and Sub-Spindle, Tool Presetter, Bar Feed, More.Yes2007 Hardinge SR-150 MSY Fanuc i Series SR
Hitachi-SeikiSuper Hi-Cell CH-250200016707LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLESeicos 16TGoodYesSwing 19.68", Swing Over Cross Slide 19.68", Maximum Turning Diameter 19.68", Length 28.3", 4,000 RPM, 25 HP, 20 Sta. ATC, 10" 3-Jaw Chuck & 8"-3-Jaw Chucks, Tool Presetter, Various Tool HoldersYes2000 Hitachi-Seiki Super Hi-Cell CH-250 Seicos 16T
Hitachi-SeikiSuper Hi-Cell CH-250200116646LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLESeicos 16TGoodYesSwing 19.68", Swing Over Cross Slide 19.68", Maximum Turning Diameter 19.68", Length 62.992", 4,000 RPM, 25 HP, 40 Sta. ATC, 10" 3-Jaw Chuck & 8" 3-Jaw Chucks, Various Tool HoldersYes2001 Hitachi-Seiki Super Hi-Cell CH-250 Seicos 16T
Hitachi-SeikiSuper Hi-Cell CH-250200116640LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLESeicos 16TGoodYesSwing 19.68", Swing Over Cross Slide 19.68", Maximum Turning Diameter 19.68", Length 28.3", 4,000 RPM, 25 HP, 20 Sta. ATC, 10" 3-Jaw Chuck & 8"-3-Jaw Chucks, Tool Presetter, Various Tool HoldersYes2001 Hitachi-Seiki Super Hi-Cell CH-250 Seicos 16T
Hyundai-KiaSKT-21 LMS200916583LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc OiTCVery GoodYesSwing 21.7"", Swing Over C.S. 13.8", Maximum Turning Diameter 10.2", Length 20.87", 4,000 RPM, 2.56" Bar Cap., 20 HP, 12 Sta. Turret, Parts Catcher - Conveyor, Bar Feed Interface, More.Yes2009 Hyundai-Kia SKT-21 LMS Fanuc OiTC
KiaSKT-21 LMS200716779LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc OiTBGoodYesSwing 21.7", Swing Over C.S. 13.8", Maximum Turning Diameter 10.2", Length 20.87", 4,000 RPM, 2.56" Bar Cap., 20 HP, 12 Sta. Turret, Tool Setter, Parts Catcher, More.Yes2007 Kia SKT-21 LMS Fanuc OiTB
MazakIntegrex 100 III SY200416663LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 ProGoodYes18" Swing, 18" Turn Dia., 6,000 RPM, 2" Bar Cap., Sub-Spindle, 40 ATC, Coolant Through Milling Head, Mazak Flex GL-750F Gantry, Renishaw OMP-40 Probing, Synchronous Tapping, Macros, EIA / ISO ProgrammingYes2004 Mazak Integrex 100 III SY Mazatrol Fusion 640 Pro
MazakIntegrex 200 SY200016572LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 MTGoodYes20.87" Swing, 19.69" Turn Dia., 30" Turn Length, 5,000 RPM, 30 HP, 40 ATC, 8" 3-Jaw Hydraulic Chuck, Coolant Through ToolYes2000 Mazak Integrex 200 SY Mazatrol Fusion 640 MT
MazakIntegrex 300 S201216242LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol MatrixVery GoodYesSwing 33.5", Swing Over C.S. 33.5", Maximum Turning Diameter 33.5", Length 60", Y-Axis, 4,000 RPM, 40 HP, 36 Sta. Turret, Sub Spindle, Full C-Axis, 10" 3-Jaw Hydraulic Chucks, Chip Conveyor, MoreYes2012 Mazak Integrex 300 S Mazatrol Matrix
MazakIntegrex e-670H-S II201116792LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Matrix IIVery GoodYesSwing 42.13", Swing Over C.S. 42.13", Maximum Turning Diameter 42.13", Length 162.91", 1,600 RPM, 10.2" Bar Cap., 60 HP, 80 Station ATC, Tool Setter,Two (2) Steady Rests, More.Yes2011 Mazak Integrex e-670H-S II Mazatrol Matrix II
MazakIntegrex i-300 S201416282LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Matrix 2Very GoodYes Yes2014 Mazak Integrex i-300 S Mazatrol Matrix 2
MazakQuick Turn Nexus-200 MS200416457LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 TGoodYesSwing 26.58", Swing Over C.S. 19", Maximum Turning Diameter 14.75" Length 22.63, 5,000 RPM, 35 HP, 12 Sta. Turret, Sub Spindle, Full C-AxisYes2004 Mazak Quick Turn Nexus-200 MS Mazatrol Fusion 640 T
MazakQuick Turn Nexus-200 MS200416493LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 TGoodYesSwing 26.58", Swing Over C.S. 19", Maximum Turning Diameter 14.75" Length 22.63, 5,000 RPM, 35 HP, 12 Sta. Turret, Sub Spindle, Full C-Axis, Chuck Air Blast, Parts Catcher, MoreYes2004 Mazak Quick Turn Nexus-200 MS Mazatrol Fusion 640 T
MazakQuick Turn Nexus-200 MS II200616459LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol MatrixGoodYesSwing 26.58", Swing Over C.S. 19", Maximum Turning Diameter 14.75" Length 22.63, 5,000 RPM, 25 HP, 12 Sta. Turret, Sub Spindle, Full C-Axis, Parts Catchers, SMW Bar FeedYes2006 Mazak Quick Turn Nexus-200 MS II Mazatrol Matrix
MazakQuick Turn Nexus-250 II MSY200716232LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol MatrixGoodYes Yes2007 Mazak Quick Turn Nexus-250 II MSY Mazatrol Matrix
MazakQuick Turn Nexus-250 MS200415821LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 ProVery GoodYes Yes2004 Mazak Quick Turn Nexus-250 MS Mazatrol Fusion 640 Pro
MazakSuper Quick Turn-18MS Mark II199616460LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol T-PLUSGoodYes Yes1996 Mazak Super Quick Turn-18MS Mark II Mazatrol T-PLUS
MazakSuper Quick Turn-200 MSY200116018LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 TGoodYes Yes2001 Mazak Super Quick Turn-200 MSY Mazatrol Fusion 640 T
MazakSuper Quick Turn-200 MSY200316087LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 TGoodYes Yes2003 Mazak Super Quick Turn-200 MSY Mazatrol Fusion 640 T
Mori-SeikiNL-2000 SMC200616690LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-850 IIIGoodYes Yes2006 Mori-Seiki NL-2000 SMC Mori-Seiki MSX-850 III
Mori-SeikiNL-2000 SY - 500200516524LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-850 IIIVery Good Swing Over Bed 36.37", Swing Over Saddle 29.72", Maximum Turning Diameter 14.01", Length 20", 5,000 RPM, 24.7 HP, 12 Sta. Turret, 2.55" Bar Capacity, Live Tooling, Chip Conveyor, Bar Feed Interface, Tool Setter, Parts Catcher, More....Yes2005 Mori-Seiki NL-2000 SY - 500 Mori-Seiki MSX-850 III
Mori-SeikiNL-2000 SY - 500200716689LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-850 IIIGoodYesSwing Over Bed 36.37", Swing Over Saddle 29.72", Maximum Turning Diameter 14.01", Length 20", 5,000 RPM, 24.7 HP, 12 Sta. Turret, 2.55" Bar Capacity, Live Tooling, Chip Conveyor, Bar Feed Interface, Tool Setter, Parts Catcher, More....Yes2007 Mori-Seiki NL-2000 SY - 500 Mori-Seiki MSX-850 III
Mori-SeikiNLX-2500 SY - 700201116744LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-853 IVVery GoodYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.4", Length 27.75", 4,000 RPM, 3.1" Bar Cap., 25 HP, 12 Sta. Turret, High Pressure Coolant, Transformer, More.Yes2011 Mori-Seiki NLX-2500 SY - 700 Mori-Seiki MSX-853 IV
Mori-SeikiNLX-2500 SY - 700201216800LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMitsubishi M730MBVery GoodYesSwing 36.37", Swing Over C.S. 29.72", Maximum Turning Diameter 14.4", Length 27.75", 4,000 RPM, 3.1" Bar Cap., 25 HP, 12 Sta. Turret, Parts Catcher, More.Yes2012 Mori-Seiki NLX-2500 SY - 700 Mitsubishi M730MB
Mori-SeikiSL-154 SY200216586LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSG-805Very GoodYesSwing / Swing Over Cross Slide - 26.8" / 20.1", Maximum Turning Diameter / Length - 11.8" / 13.7", 6,000 RPM Main & Sub, 10 HP, 1.77" Bar Capacity, Collet Chuck on Main and Sub-Spindles, Bar Feed Interface, Bar Feed, Auto Parts Catcher, More..Yes2002 Mori-Seiki SL-154 SY Mori-Seiki MSG-805
OkumaCaptain L-370 MW BB200315923LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEOSP-E100LVery GoodYesSwing Over Bed 20.8", Swing Over Saddle 16.54", Maximum Turning Diameter 13.38", Length 20", 3,800 RPM, 30 HP, 12 Sta. Turret, Sub-Spindle, LNS Bar Feed, Two (2) Live Holders, Loaded With Options - Low HoursYes2003 Okuma Captain L-370 MW BB OSP-E100L
OkumaGenos L-300 MYW201416706LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEOSP-P300L-RVery GoodYes20.47" Swing, 11.81" Turn Dia., 17.72" Turn Length, 3,800 RPM, 20 HP, 12 Sta. Turret, 10" 3-Jaw Hydraulic Chuck and 6" on Sub Spindle, Parts Catcher, Coolant Through, Loaded With OptionsYes2014 Okuma Genos L-300 MYW OSP-P300L-R
OkumaLB-3000 EX II MYW201316697LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEOSP-P300LVery GoodYesSwing 22.38", Swing Over C.S. 18.5", Maximum Turning Diameter 13.39", Length 39.76", 5,000 RPM, 3.18" Bar Cap., 40 HP, 12 Sta. Turret, High Pressure Coolant, More.Yes2013 Okuma LB-3000 EX II MYW OSP-P300L
OkumaLB-3000 EX MYW201716667LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEOSP-U200LExcellentYes Yes2017 Okuma LB-3000 EX MYW OSP-U200L
SamsungSL-25 ASY201016739LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBVery GoodYesSwing 25.59", Swing Over C.S. 21.26", Maximum Turning Diameter 14.17", Length 18.70", 6,000 RPM, 2.6" Bar Cap., 20 HP, 12 Sta. Turret, Tool Eye, More.Yes2010 Samsung SL-25 ASY Fanuc 18iTB